Biomass
boilers
For
warm water
- BIO
Automated, pellet, wood chips,
- Farmer
Automated, pellet,wood chips,
wood logs, multifuel
- Automat
Self-loading, automated, pellet,
wood chips, multifuel
Steam boilers
- Low pressure steam (0,5bar) automated boilers
for biomass, pellet, wood chips, multifuel
Coal
boilers
- Automated brown coal boilers
For warm water or low pressure steam
Fuel
feeder systems
|
C80
BIO main parts |
|
1. Boiler body
2. Ash bin
3. Exhaust fan
4. Heat flow
5. Return flow
6. Inspection hole
7. Control unit
8. Agitator motor
9. Ignition hole
10. Rotating grate
11. Fuel container
12. Flue outlet and regulator
13. Ash cleaning holes
14. Cinder door
15. Water drain screw
16. Drive arm
17. Sealed fuel door
18. Heat exchange door
19. Secondary air inlet
20. Cleaning hole of the multicyclone module
21. Service aperture
22. Grate adjustment bearings
23. Banding arc
24. Compass buffers
25. Draught adjusting flap
26. Multicyclone filter
27. Hopper lining
28. Burn back thermostat
29. Manometer
30. Agitator arms
31. Burn back sensor
32. Level sensor switch
33. Level sensor arm
34. Flue gas thermometer |
|
C80 BIO dimension
|
Recommend minimum distances: a:
200mm b:
600mm c:
1000mm d:
1200mm
The levers are positioned on
the right or left hand side when facing the fuel container. Leave
1m (dim. C) for opening the cinder
door and for emptying. Leave adequate space of 1-2m (dim.
D) in front of the fuel container for filling. Leave min.
0.6m at the back of the boiler (dim. B)
for the flue outlet and for plumbing. The left side of the boiler
(dim. A) should be at least 0.2m
from the wall. The fuel container door extends 0.2m above the
boiler when opened.
|
|