Biomass
boilers
For
warm water
- BIO
Automated, pellet, wood chips,
- Farmer
Automated, pellet,wood chips,
wood logs, multifuel
- Automat
Self-loading, automated, pellet,
wood chips, multifuel
Steam boilers
- Low pressure steam (0,5bar) automated boilers
for biomass, pellet, wood chips, multifuel
Coal
boilers
- Automated brown coal boilers
For warm water or low pressure steam
Fuel
feeder systems
|
CARBOROBOT Classic 120 |
C120 main parts |
|
1. Shell of the boiler
2. Ash chamber
3. Flue-gas fan
4. Outgoing heating water
5. Returning heating water
6. Observing hole
7. Boiler control
8. Mover system
9. Firing hole
10. Rotary grate
11. Fuel container
12. Smoke outlet
13. Flue-ash cleaning hole
14. Cinder door
15. Water discharge screw
16. Stepping drive for grate
17. Fuel refilling door
18. Heat exchanger door
19. Secondary air tube
20. Cyclone cleaning hole
21. Controle hole
22. Grate adjusting bearings
23. Banding arc
24. Compass buffers
25. Draught adjusting flap
26. Multicyclone module |
|
Recommend minimum distances: a:
400mm b:
800mm c:
1000mm d:
1500mm
The levers are positioned
on the right or left hand side when facing the fuel container.
Leave 1m (dim. C) for opening
the cinder door and for emptying. Leave adequate space
of 1-2m (dim. D) in front
of the fuel container for filling. Leave min. 0.8m at
the back of the boiler (dim. B)
for the flue outlet and for plumbing. The left side of
the boiler (dim. A) should
be at least 0.4m from the wall. The fuel container door
extends 0.2m above the boiler when opened
At the 100-120-140-180-300
types the fuel container can be top
feeding or front
feeding. Top feeding good for feeder system placed
over the boiler or when using pathway over the fuel container.
Front feeding need for the manual feed or for the screw
feeder.
|
|
|