CARBOROBOT Steam boilers

    
HU      RU   

| Home | Products | References | Video | Price list | Design | Company | Partners | Contact us

Biomass boilers
         For warm water

  • BIO
    Automated, pellet, wood chips,

  • Farmer
    Automated, pellet,wood chips,
    wood logs, multifuel


  • Automat
    Self-loading, automated,
    pellet, wood chips, multifuel

Steam boilers    

  • Low pressure steam (0,5bar) automated boilers for biomass, pellet, wood chips, multifuel        

Coal boilers

  • Automated brown coal boilers
    For warm water or low pressure steam

Fuel feeder systems


CARBOROBOT Steam main types


CARBOROBOT BIO Steam manually feed boilers

 


  CARBOROBOT Automat Steam boilers with automatic fuel feeder system FEEDLAN


Short rewiev

The CARBOROBOT Steam low pressure boilers (max 0,5bar) are not included under the supervision of the Pressure Equipment Directive (PED) (Decision No 768/2008/EC of the European Parliament). Therefore there is no need for a supervisory approval and certified heating person during operation. The boilers can be operated by a properly trained person too. This Directive should apply to pressure equipment subject to a maximum allowable pressure PS greater than 0,5 bar. Pressure equipment subject to a pressure of not more than 0,5 bar does not pose a significant risk due to pressure. Therefore, there should not be any obstacle to its free movement within the Union.

The CARBOROBOT BIO Steam models are multifuel biomass boilers are suitable for producing low pressure and high ash content fuel it is useful too (agripellet, straw pellet).

Feed water tank
Instrument package
Chemical Dosing Pump
Whistle

The short steam technical info.

CARBOROBOT Steam parts


1. Boiler body
2. Ash bin
3. Exhaust fan
4. Steam out (Heat flow)
5. Feed water (Return flow)
6. Inspection hole
7. Control unit
8. Agitator motor
9. Ignition hole
10. Rotating grate
11. Fuel container
12. Flue outlet and regulator
13. Ash cleaning holes
14. Cinder door
15. Water drain screw
16. Drive arm
17. Sealed fuel door
8. Heat exchange door
19. Secondary air inlet
20. Cleaning hole of the multicyclone module
21. Service aperture
22. Grate adjustment bearings
23. Banding arc
24. Compass buffers
25. Draught adjusting flap
26. Multicyclone filter
27. Hopper lining
28. Burn back thermostat
29. Manometer
30. Agitator arms
31. Burn back sensor
32. Level sensor switch
33. Level sensor arm
34. Flue gas thermometer
35 Steam safety valave(0,5bar)
36 Steam lead tube(Prohibitid to close)
37.Electronoc pressure sensor
38.Steam temperature sensor
39 Connection of pressure sensor.(The valve must be all the time open. Only at the test may closed !)
40 Water level sensors
40/a Reserve minimum water level sensor
41 Feed water inlet(alternative)
42 --
43 Hot water outlet(if necessary)
44 Place for water thermometer(in case water regime)
45 --
46 Water level observation glass tube
47 SHW heat exchanger returning tube.

Copyright 2016 CARBOROBOT
Contact informations     tel/fax:+36-13852-862    info@carborobot.com