CARBOROBOT 140 BIO biomass boiler

    
HU      RU   

| Home | Products | References | Video | Price list | Design | Company | Partners | Contact us

Biomass boilers
         For warm water

  • BIO
    Automated, pellet, wood chips,

  • Farmer
    Automated, pellet,wood chips,
    wood logs, multifuel


  • Automat
    Self-loading, automated,
    pellet, wood chips, multifuel

Steam boilers    

  • Low pressure steam (0,5bar) automated boilers for biomass, pellet, wood chips, multifuel        

Coal boilers

  • Automated brown coal boilers
    For warm water or low pressure steam

Fuel feeder systems


CARBOROBOT 140 BIO

C140 BIO main parts

 

 


1. Boiler body
2. Ash bin
3. Exhaust fan
4. Heat flow
5. Return flow
6. Inspection hole
7. Control unit
8. Agitator motor
9. Ignition hole
10. Rotating grate
11. Fuel container
12. Flue outlet and regulator
13. Ash cleaning holes
14. Cinder door
15. Water drain screw
16. Drive arm
17. Sealed fuel door
8. Heat exchange door
19. Secondary air inlet
20. Cleaning hole of the multicyclone module
21. Service aperture
22. Grate adjustment bearings
23. Banding arc
24. Compass buffers
25. Draught adjusting flap
26. Multicyclone filter
27. Hopper lining
28. Burn back thermostat
29. Manometer
30. Agitator arms
31. Burn back sensor
32. Level sensor switch
33. Level sensor arm
34. Flue gas thermometer
C140 BIO dimension



Recommend minimum distances:   a: 400mm   b: 800mm    c: 1000mm   d: 1500mm

The levers are positioned on the right or left hand side when facing the fuel container. Leave 1m (dim. C) for opening the cinder door and for emptying. Leave adequate space of 1-2m (dim. D) in front of the fuel container for filling. Leave min. 0.8m at the back of the boiler (dim. B) for the flue outlet and for plumbing. The left side of the boiler (dim. A) should be at least 0.4m from the wall. The fuel container door extends 0.2m above the boiler when opened

At the 100-120-140-180-300 types the fuel container can be top feeding or front feeding. Top feeding good for feeder system placed over the boiler or when using pathway over the fuel container. Front feeding need for the manual feed or for the screw feeder.

 

Copyright © 2023 CARBOROBOT
Contact informations     tel/fax:+36-13852-862    info@carborobot.com